Flat Section Replacement
Tapered insulation and a new membrane over flat sections. See flat roofing.
As an Auburn commercial roofing contractor, we repair and replace roofs on churches, schools, and community halls, with work timed around services, classes, and events.

An Auburn commercial roofing contractor works around buildings that fill up on set days and sit quiet on others, so the noisiest work (tear-off and fastening) goes on the quiet days. Sections over sanctuaries, classrooms, and halls are planned so the room below is dry before it is used again.
Many of these buildings also join a flat section to a pitched or metal roof. That transition is the most common leak, so it gets its own flashing plan.

Community buildings show these signs most often.
Overflow from gutters over doorways points to clogged gutters or runoff aimed at the entry.
Where a pitched section ends at a flat roof, trim gaps and stains often show from the lot.
Staff setting out buckets before services or events shows a leak that has outlasted quick patches.
Water showing in one room often enters at a curb or transition several feet away.
Curbs and penetrations through the roof are flashed to full height or they leak in heavy rain.
Musty air in a large hall points to wet insulation over a wide, flat section of roof.
The joint where a low-slope section meets a wall or a metal eave is the detail that leaks first.
Water collecting where a flat section meets a taller wall needs a cricket to move it.
Leaves packed in gutters over doors send water onto steps and walks.

For buildings people gather in, the gains show up on the days they use them.
Sections are closed up before services, classes, or events in the rooms below.
Counterflashing on the wall and a cricket behind it close the most common leak point.
Gutters and downspouts routed away from doors keep water and ice off entries.
Flat and pitched sections are scoped together, so the joint between them gets built once.
Work dates set weeks ahead let staff move classes or events off the roof sections being replaced.
Community buildings often need two systems and the joint between them.
Tapered insulation and a new membrane over flat sections. See flat roofing.
Refastening, new panels, or new steel on pitched sections. See commercial metal roofing.
Counterflashing, crickets, and trim where a low-slope section meets a wall or metal eave.
Leaks over rooms in use get repaired while larger work is planned. See roof repair.
Rubber membrane on flat sections where cold-weather work cannot wait. See EPDM roofing.
Gutters and downspouts rerouted so water lands away from doors and walks.

Call us with the room and the next date it will be used. We start the roof walk above that room and look at the curbs, skylights, and transitions nearest it.
Work is sequenced around the building calendar from the first visit.
We walk every section, flat and pitched, and look closely at the transitions where they meet.
Work days are set around services, classes, and events, with quiet days used for tear-off.
Each section over a sanctuary, classroom, or hall is closed up before that room is used again.
Material staging and debris chutes stay away from the doors people use, with walks kept clear each day.
Counterflashing, crickets, and trim finish the joints, and the roof is walked with your building contact.
Need roof work somewhere besides Auburn? Call us or send us a message. We serve commercial buildings in these towns too.
72,294
Residents, 2020 census
Our home base, with plant and warehouse roofs of every size.
10,176
Residents, 2020 census
Strip center roofs reworked with tenants open.
7,164
Residents, 2020 census
Masonry roofs with parapets, coping, and scuppers.
4,299
Residents, 2020 census
Ponding flat roofs converted to sloped metal.
2,505
Residents, 2020 census
Recovers that raise the roof edge height.
15,014
Residents, 2020 census
Tear-offs that clear out abandoned curbs.
2,356
Residents, 2020 census
Roofs carrying signs, lights, and conduit.
875
Residents, 2020 census
Roof replacements with deck repair first.
Also Serving
Population: 2020 U.S. census, via Wikipedia's Kentucky city list.
Start with city hall and the Logan County offices. The state's Logan County sheet shows the county health department where a city building contact would sit, so confirm the path before tear-off or added insulation height.
Where a low-slope section meets a metal roof at a wall or eave, counterflashing goes on the wall, the membrane runs up under it, and a cricket moves water that collects against the joint. It is planned as its own line item.
Yes. Tear-off and fastening run on quiet days, and each section over the sanctuary is closed up before the next service. Tell us the regular schedule and any special events.
Around classes, games, and events. Sections over rooms in use are done first on days the rooms sit empty, and entrances stay open for staff.
Our work is commercial roofing. Fellowship halls, schools, offices, and sanctuaries are in scope; residences on the property go to a residential roofer.
The calendar for the next few months, any past repair records, and the rooms where leaks have shown. Roof access details help us plan the first walk.
It can be planned that way. Tear-off over classrooms and gyms goes in breaks and weekends, with smaller repairs over offices handled on school days. Long breaks fit the largest sections.
Call us with the service date. A temporary repair or tie-in goes on first to keep the room dry, and the permanent repair follows on a quiet day.
Tell us about the building and its calendar. We plan the work so every room is dry for its next use.
Want Us To Call You About Your Roof?
Leave a name and number. Prefer to talk now? Call (364) 205-6781.